Mc Crypt LED effect light No. of LEDs: 3 LCB001 LCB001 Ficha De Dados

 

 

The LED effect spotlight is used to generate lighting effects in light-show facilities, party rooms, etc.
The product may only be connected to the enclosed power pack. The power pack may only be con-

nected to a mains outlet with 100-240 V AC/50/60 Hz of the public grid. No other electrical power 

supply is permitted.
The product may only be used indoors, never outdoors. Contact with moisture, for example in bath-

rooms, must be avoided.
Any use other than that described above could lead to damage to this product and involves the risk of 

short circuits, fi re, electric shock, etc.
No part of the product may be modifi ed or rebuilt, and the housing must not be opened.

• Lighting effect
• Mains adaptor
• Allen key
• Instructions

  

 

Ꮨ

•   Prior to commissioning, check the device for damage. If the device is damaged, you must not use it.
•   All persons operating, installing, setting up, commissioning or servicing this effect spotlight must be 

appropriately trained and qualifi ed and they must follow these operating instructions.

•   For safety reasons, any unauthorised conversion and/or modifi cation to the product is not permitted.
•   The light effect device is designed in protection class III and may only be operated with the enclosed 

power pack.

•   The power pack has been designed in protection class II and may only be operated on a mains 

socket of the public grid.

•   The power pack may never be plugged in or unplugged with wet hands.
•   The device is still connected with the mains when it is switched off. To disconnect it from the power 

supply completely, the power pack must be pulled out from the mains socket.

•   Never operate the device unsupervised.
•   Do not look straight into the light rays during operation. Temporarily, the light beams can lead to 

visual defects. Moreover, they may trigger epileptic seizures for vulnerable persons. Of course, this 

applies particularly to epileptics.

•   Check the device for damage frequently. Do not touch the power pack, the light effect device, or the 

connection cable if they show visible damage. First, switch off the power at the mains socket (e.g. 

with the corresponding circuit breaker), and then carefully unplug the power supply unit from the 

mains socket. Do not use the product afterwards, but take it to a specialist workshop.

•   Never replace a damaged connecting cable of the power pack. If the connecting cable is damaged, 

the power pack is unusable and must be disposed of. Do not repair it.

 °

•   Avoid subjecting the device to severe mechanical stress. Do not expose it to high temperatures, 

strong vibration, high degrees of humidity or dripping or spray water.

•   Use the device only in temperate climate regions and not in tropical ones.
•   Never position vessels or containers containing liquids, such as glasses, buckets, vases or plants, 

in the direct vicinity of the product. Liquids may seep into the casing and thus impair the electrical 

safety of the device. Furthermore, there is a signifi cant risk of fi re or a lethal electric shock! In such 

an event, isolate the mains socket to which the product is connected (e.g. switch off the automatic 

fuse) and unplug the power pack from the mains socket. Afterwards, the product can no longer be 

used; take it to a specialist workshop.

•   Do not place open sources of fi re, such as burning candles, in the vicinity of the device.
•   This product is not a toy; it is not suitable for children. Children are not aware of the potential dangers 

involved when using electrical devices.

•   Do not leave packaging material lying around carelessly. It may become a dangerous plaything for 

children.

•   Also observe any further safety instructions in the individual sections of this operating guide.
•   In commercial institutions, the accident prevention regulations of the Employer’s Liability Insurance 

Association for Electrical Systems and Operating Facilities are to be observed.

•   If in doubt about how to connect the product correctly, or should any questions arise that are not 

answered in these operating instructions, please contact our technical advisory service or another 

specialist.

(1) STROBE switch 
(2) MUSIC switch
(3)  Connection 5 V/DC
(4) ON/OFF switch

 LCB001 Mini LED Magic Ball