Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Ficha De Dados
Códigos do produto
6ED1057-3BA00-0AA8
Tutorial
3.5 Practical example
LOGO!Soft Comfort Online Help
178
Operating Instructions, 06/2014
UDF Editor
Note that UDF blocks do not support inputs, outputs, analog inputs, analog outputs, M8,
M25, M26, M27, shift registers, the data log or message text function blocks.
You have now completed your circuit program. Verify all connections once again and
You have now completed your circuit program. Verify all connections once again and
configure the block parameters to suit your requirements.
3.5.10
Testing the circuit program
Place your circuit program in simulation mode (Page 95) and verify that your program is
error-free.
Although you now know that you can run your circuit program in LOGO!, you still need to
Although you now know that you can run your circuit program in LOGO!, you still need to
make sure your circuit program operates as planned. You may also want to modify certain
parameters. You can try out different input values, test the reaction of the system to power
failure and compare your calculations or expectations with the simulated reaction of the
outputs. The simulation toolbar and status window (Page 35) provide the tools you need for
these tasks.
The float and pressure switches have a momentary action. If, however, you wish to simulate
The float and pressure switches have a momentary action. If, however, you wish to simulate
your circuit for testing purposes, simply change the input function from momentary action to
switching action.
Example for the FBD Editor:
Example for the FBD Editor:
When you have made all corrections and everything runs as expected, you can start to
document your circuit program.