Wago 759-302 COMMISSIONING TOOL I/O-CHECK 2 759-302 Ficha De Dados

•  99 

Use this command to toggle the Control Mode Direct ON or OFF. 

Digital outputs can be activated by clicking on the display field in the process 
data dialog box or on the LED in the node display or by hitting the <space 
bar>. Clicking or hitting the <space bar> another time deactivates the 
output. 

Analog output values are set in the process data dialog box by moving the 
slides or by inputting a value into the display field and hitting the <Enter> 
key. 

Values for specialty modules are set in the process data dialog by inputting 
them into the display field and hitting the the <Enter> key. 

Keyboard: 

<Ctrl> + <Shift> + <D> 

Use this command to toggle the Control Mode Collect ON or OFF. 

As long as this Mode is activated, an additional window called ’Output Data’ 
with a S

 button is opened: 

 

For activation and deactivation of the digital outputs see Control Mode Direct. 
However, the modified output states are not sent directly but are latched and 
send all together to the coupler or controller after clicking on the button S

. 

This makes it possible to simulate the performance of a PLC when writing 
several outputs. 

Keyboard: 

<Ctrl> + <Shift> + <C> Toggle 

the 

Control-Mode 

Collect ON or OFF 
 
<Ctrl> + <Shift> + <S> 

Send modified output states