Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
154
Error data structure: Data format of error data structure is shown below.
Description
Bytes Offset
Reserved
1 00h
Error register
1 01h
Sector count register
1
02h
LBA Low register
1
03h
LBA Mid register
1
04h
LBA High register
1
05h
Device register
1 06h
Status register
1 07h
Extended error data (vendor specific)
19
08h
State
1 1Bh
Life timestamp (hours)
2
1Ch
30
Table 122 Error data structure
State field contains a value indicating the device state when command was issued to the device.
Value
State
x0h
Unknown
x1h
Sleep
x2h
Standby
x3h
Active/Idle
x4h
S.M.A.R.T. Off-line or Self-test
x5h-xAh
Reserved
xBh-xFh
Vendor specific
Note: The value of x is vendor specific
14.41.6
Self-test log data structure
The following defines the 512 bytes that make up the Self-test log sector. All multi-byte fields shown in
these data structures follow the ATA/ATAPI-7 specifications for byte ordering.
these data structures follow the ATA/ATAPI-7 specifications for byte ordering.
Description Bytes
Offset
Data structure revision
2
00h
Self-test number
1
n*18h+02h
Self-test execution status
1
n*18h+03h
Life time power on hours
2
n*18h+04h
Self-test failure check point
1
n*18h+06h
LBA of first failure
4
n*18h+07h
Vendor specific
15
n*18h+0Bh
...
Vendor specific
2
1FAh
Self-test log pointer
1
1FCh
Reserved
2 1FDh
Data structure checksum
1
1FFh
512
Note: n is 0 through 20
Table 123 Self-test log data structure
The data structure contains the descriptor of Self-test that the device has performed. Each descriptor is
24 bytes long and the self-test data structure is capable to contain up to 21 descriptors.
After 21 descriptors has been recorded, the oldest descriptor will be overwritten with new descriptor.
Self-test log pointer points the most recent descriptor. When there is no descriptor the value is 0. When
there is descriptor(s) the value is 1 through 21.
24 bytes long and the self-test data structure is capable to contain up to 21 descriptors.
After 21 descriptors has been recorded, the oldest descriptor will be overwritten with new descriptor.
Self-test log pointer points the most recent descriptor. When there is no descriptor the value is 0. When
there is descriptor(s) the value is 1 through 21.