Hitachi hard disk 0J11285 500 GB 2.5 " 8 MB 0J11285 Ficha De Dados
Códigos do produto
0J11285
Z5K500 OEM Specifications
157
14.43 Standby Immediate (E0h/94h)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
- - - - -
-
-
- Data
- - - - - -
-
-
Feature
- - - - -
-
-
- Error
...See
Below...
Sector
Count
- - - - -
-
-
- Sector
Count
- - - - - -
-
-
LBA
Low
- - - - -
-
-
- LBA
Low
- - - - - -
-
-
LBA
Mid
- - - - -
-
-
- LBA
Mid
- - - - - -
-
-
LBA
High
- - - - -
-
-
- LBA
High
- - - - - -
-
-
Device
- - - - -
-
-
- Device
- - - - - -
-
-
Command
1 1 1 0 0 0 0 0 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC UNC 0
IDN
0
ABT T0N AMN BSY RDY
DF
DSC DRQ COR IDX ERR
0 0 0 0 0 V 0 0
0 V 0 V - 0 0 V
Table 127 Standby Immediate Command (E0h/94h)
The Standby Immediate command causes the device to enter Standby mode immediately.
When this command is issued, the device confirms the completion of the cached write commands. Then
the device is spun down, but the interface remains active.
If the device is already spun down, the spin down sequence is not executed.
During the Standby mode, the device will respond to commands, but there is a delay while waiting for the
spindle to reach operating speed.
The Standby Immediate command will not affect the auto power down timeout parameter.
When this command is issued, the device confirms the completion of the cached write commands. Then
the device is spun down, but the interface remains active.
If the device is already spun down, the spin down sequence is not executed.
During the Standby mode, the device will respond to commands, but there is a delay while waiting for the
spindle to reach operating speed.
The Standby Immediate command will not affect the auto power down timeout parameter.