Intel 4 519K HH80547PE0831MN Ficha De Dados

21

 specifies absolute maximum and minimum ratings. Within functional operation limits, 

functionality and long-term reliability can be expected.

At conditions outside functional operation condition limits, but within absolute maximum and 
minimum ratings, neither functionality nor long-term reliability can be expected. If a device is 
returned to conditions within functional operation limits after having been subjected to conditions 
outside these limits, but within the absolute maximum and minimum ratings, the device may be 
functional, but with its lifetime degraded depending on exposure to conditions exceeding the 
functional operation condition limits.

At conditions exceeding absolute maximum and minimum ratings, neither functionality nor long-
term reliability can be expected. Moreover, if a device is subjected to these conditions for any 
length of time then, when returned to conditions within the functional operating condition limits, it 
will either not function, or its reliability will be severely degraded.

Although the processor contains protective circuitry to resist damage from static electric discharge, 
precautions should always be taken to avoid high static voltages or electric fields.

1. For functional operation, all processor electrical, signal quality, mechanical, and thermal specifications must 

be satisfied.

2. Storage temperature is applicable to storage conditions only. In this scenario, the processor must not receive 

a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect the long-
term reliability of the device. For functional operation, refer to the processor case temperature specifications.

3. This rating applies to the processor and does not include any tray or packaging.

The processor DC specifications in this section are defined at the processor core silicon and not 
at the package pins unless noted otherwise. See 

 for the pin signal definitions and signal 

pin assignments. Most of the signals on the processor FSB are in the GTL+ signal group. The DC 
specifications for these signals are listed in 

.

Previously, legacy signals and Test Access Port (TAP) signals to the processor used low-voltage 
CMOS buffer types. However, these interfaces now follow DC specifications similar to GTL+. The 
DC specifications for these signal groups are listed in 

 and 

.

 through 

 list the DC specifications for the processor and are valid only while 

meeting specifications for case temperature, clock frequency, and input voltages. Care should be 
taken to read all notes associated with each parameter.

MSR_PLATFORM_BRV bit 18 is a Platform Requirement Bit (PRB) that indicates that the 
processor has specific platform requirements.

V

CC

Any processor supply voltage with 
respect to V

SS

 - 0.3

1.55

V

1

T

C

Processor case temperature

See 

°C

2, 3

T

STORAGE

Processor storage temperature

 –40

 +85

°C

2, 3