Invacare Non-Removable Device 1820 Manual Do Utilizador
Non-Removable Device
2
Part No 1076733
3. Follow one of the following instructions:
• Footrest - Position the clamp tab over the lower hinge pin of the footrest
(Detail “A”).
• Elevating Legrest - Position the clamp tab over the upper hinge pin of the
elevating legrest (Detail “B”).
4. Squeeze the clamp together with pliers to secure around front frame tube.
NOTE: The clamp MUST be positioned on the front frame tube to allow the swingaway
front rigging to operate properly.
front rigging to operate properly.
5. Install the lug bolt through the clamp from the inside of the wheelchair frame.
6. Install the locknut onto the lug bolt. Securely tighten.
7. Repeat STEPS 1 - 6 for the opposite side.