BMW 2015 Z4 sDrive35is Manual Do Proprietário

The gear position and the engaged gear, such
as M4, are displayed.

▷

Transmission position P can only be disen‐
gaged if the engine is running.

▷

Before moving the lever away from P or N
with the vehicle stationary, depress the
brake; otherwise, the transmission will not
shift.

Press on the brake pedal until you start
driving

To prevent the vehicle from creeping after you
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀

Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if necessary.
When shifting out of P or into R, press button 1
at the same time.
The engaged transmission position is also dis‐
played on the selector lever.
When you release the selector lever, it returns
to its center position.

The vehicle can roll.
N remains engaged after the engine is
switched off if the remote control remains in
the ignition lock. This function can be used in
an automatic car wash, refer to page 

, for

example. P is automatically engaged after ap‐
prox. 30 minutes.

In Drive mode, all forward gears are shifted au‐
tomatically.

Select only when the vehicle is stationary.

The rear wheels are locked.
P is engaged automatically when the following
conditions are met:

▷

The driver's door is opened while the en‐
gine is running, the safety belt is not fas‐
tened and neither the brake pedal nor the
accelerator is activated.

▷

The engine is switched off unless N is en‐
gaged and the remote control is in the igni‐
tion lock.

▷

The remote control is removed from the ig‐
nition lock, refer to page 

.

Before leaving the vehicle, ensure that the
transmission position P is engaged; otherwise,
the vehicle may begin to roll.

Select only when the vehicle is stationary.

Seite 69

69

Online Edition for Part no. 01 40 2 954 104 - II/15