BMW 2015 Z4 sDrive35is Manual Do Proprietário
▷
Shift up: pull right shift paddle.
▷
Shift down: pull left shift paddle.
Gears can be shifted using the shift paddles in
Drive mode or in manual mode.
Drive mode or in manual mode.
Gear change in manual mode
When manual mode is active, refer to page
gears can be changed using the shift paddles
or the selector lever.
or the selector lever.
Gear change in Drive mode
The shift paddles can be used to change gears
in Drive mode as well.
Afterwards, if the shift paddles are not used for
some time and vehicle acceleration is insuffi‐
cient, the forward gears are changed again au‐
tomatically.
in Drive mode as well.
Afterwards, if the shift paddles are not used for
some time and vehicle acceleration is insuffi‐
cient, the forward gears are changed again au‐
tomatically.
Launch Control
Launch Control enables you to drive off with an
optimal vehicle acceleration on a high grip road
surface.
optimal vehicle acceleration on a high grip road
surface.
Do not use Launch Control too often
Do not use Launch Control too often, as
Do not use Launch Control too often, as
the higher loads on the vehicle lead to prema‐
ture component wear.◀
ture component wear.◀
Launch Control is available when the engine is
at operating temperature, i.e., after driving con‐
tinuously for at least 6 miles/10 km.
at operating temperature, i.e., after driving con‐
tinuously for at least 6 miles/10 km.
1.
With the engine running, depress the brake
pedal with your left foot.
pedal with your left foot.
2.
Activate the SPORT+ program of the Dy‐
namic Driving Control, refer to page
namic Driving Control, refer to page
.
3.
With the vehicle stationary, activate manual
mode and select first gear.
mode and select first gear.
4.
Press the accelerator all the way down.
The engine speed when driving off is con‐
trolled. A flag symbol appears in the instru‐
ment cluster.
The engine speed when driving off is con‐
trolled. A flag symbol appears in the instru‐
ment cluster.
5.
The vehicle accelerates when you release
the brake pedal. Keep the accelerator
pressed all the way down.
the brake pedal. Keep the accelerator
pressed all the way down.
6.
The transmission shifts up automatically as
long as the accelerator is pressed all the
way down.
long as the accelerator is pressed all the
way down.
Launch Control only becomes available again
after a certain distance has been driven.
Launch Control can only be used after the
break-in phase, refer to page
after a certain distance has been driven.
Launch Control can only be used after the
break-in phase, refer to page
.
To maintain driving stability, activate DSC
whenever possible.
whenever possible.
Manually releasing and engaging the
transmission lock
If a power failure occurs, e.g., if the battery is
discharged or disconnected, the transmission
lock must be released manually, otherwise the
rear wheels are blocked and the vehicle cannot
be towed.
Release the transmission lock manually for
towing only and set the parking brake before‐
hand to prevent the vehicle from rolling. After
parking the vehicle, engage the transmission
lock again manually, refer to page
discharged or disconnected, the transmission
lock must be released manually, otherwise the
rear wheels are blocked and the vehicle cannot
be towed.
Release the transmission lock manually for
towing only and set the parking brake before‐
hand to prevent the vehicle from rolling. After
parking the vehicle, engage the transmission
lock again manually, refer to page
Manual release
1.
Unclip the sleeve of the selector lever.
2.
Pull the sleeve up over the selector lever
until the sleeve is inside out.
until the sleeve is inside out.
3.
Unclip and raise cover frame.
Seite 71
Driving
Controls
71
Online Edition for Part no. 01 40 2 954 104 - II/15