Samsung BD-E5400/ZA Manual Do Produto

 

✎

NOTE

 ` No disc should be in the product when you 

upgrade the software using the USB Host jack.

 ` When the software upgrade is done, check the 

software details in the software Upgrade menu.

 ` Do not turn off the player during the software 

upgrade. It may cause the player to malfunction.

 ` Software upgrades using the USB Host jack 

must be performed with a USB flash memory 

stick only.

Auto Upgrade Notification
If you have connected the player to your 

network, and then set Auto Upgrade 

Notification on, the player automatically 

notifies you when a new software version is 

available for the player.

To set Auto Upgrade Notification on, follow 

these steps:
1.  Select Auto Upgrade Notification, and 

then press the v button.

2.  Use the ▲▼ buttons to select On, and 

then press the v button.

If there is a new software version available, 

the player notifies you with a popup message.
1.  To upgrade the firmware, select yes 

in the Pop-up. The player turns off 

automatically, then restarts, and begins 

the download. (Never turn on the player 

manually here.)

2.  The update progress popup appears. 

3.  When the update is complete, the player 

turns off again automatically.

4.  Press the pOWER button to turn on the 

player.

 

✎

NOTE

 ` The update is complete when the player turns 

off after restarting. Press the POWER button to 

turn on the updated player for your use. 

 ` Never turn the player off or on manually during 

the update process.

 ` Samsung Electronics takes no legal 

responsibility for player malfunction caused by 

an unstable Internet connection or consumer 

negligence during software upgrade.

Contact Samsung

Provides contact information for assistance 

with your player.

Terms of Service Agreement

View the general disclaimer regarding third 

party contents and services.

Reset

All settings will revert to the factory default 

except for the network settings.

Media Play

1.  Press the 8 button to open the disc 

tray.

2.  Push a disc gently into the disc tray with 

the disc's label facing up.

3.  Press the 8 button to close the disc 

tray. Playback starts automatically.

4.  If playback does not start automatically, 

select the Videos option on the Main 

screen, and then press the v button.

You can play multimedia files located on a 

USB storage device.
1.  Move to the Home menu.
2.  In Stop mode, connect the USB storage 

device to the USB port on the back 

panel of the player.  

The message “Do you want to access 

the device?” will be displayed.

3.  Press the ◄► button to select yes, 

then press the v button.

4.  If you have a disc in the Blu-ray player, 

press the REd (A) or BLUE (d) button.  

If you do not, go to Step 6.  

If you pressed the REd (A) button, go to 

Step 5.  

If you pressed the BLUE (d) button, go 

to Step 4

-1

.

5.  Press the ▲▼ buttons to select USB, 

then press the v button.

6.  Press the ◄► buttons to select Videos, 

Music or Photos, then press the v 

button. Go to Step 7.

4

-1

.  If you pressed the BLUE (d) button, the 

screen below appears. Go to 5

-1

.

5

-1

.  Press the ◄► buttons to select USB, 

then press the v button.

6

-1

.  Press the ▲▼ buttons to select Videos, 

Music or Photos, then press the v 

button.

7.  The controls and tools you use to play 

videos, music, and pictures located on 

a USB device are identical to those you 

use to play videos, music, and pictures 

on a disc. (See pages 15~16)

YouTube

PANDORA

              123   a Change Device

 c Safely Remove USB  d View Devices  " Enter

No Disc
123
DLNA

YouTube

PANDORA

123

123

  d Home       " Enter