Samsung BD-E5400/ZA Manual Do Produto

playlist

1.  To move to the Music List, press the 5 

or RETURN button. 

The Music List screen appears.

2.  Press the ▲▼◄► buttons to move 

to a desired track, and then press the 

yELLOW (C) button. A check appears 

on the track. 

Repeat this procedure to select 

additional tracks.

3.  To remove a track from the list, move to 

the track, and then press the yELLOW 

(C) button again. 

The check on the track is cancelled.

4.  When done, press the v button.
5.  To go to the Music List, press the 

RETURN button.

 

✎

NOTE

 ` You can create a playlist with up to 99 tracks 

on Audio CDs (CD-DA).

You can play photo contents located on a 

DVD, CD, or a USB storage device. 

Using the Tools menu

During playback, press the TOOLS button.

Slide Show

Select to start the slide show.

Background 

Music

Select to listen to music while 

viewing a slide show.

Zoom

Select to enlarge the current 

picture. (Enlarge up to 4 times)

Rotate

Select to rotate the picture. (This 

will rotate the picture either 

clockwise or counter clockwise.)

Information

Shows the picture information.

 

✎

NOTE

 ` Depending on the disc or storage device, the 

Tools menu may differ.

 ` To enable the background music function, the 

photo file must be in the same storage media 

as the music file. 

However, the sound quality can be affected 

by the bit rate of the MP3 file, the size of the 

photo, and the encoding method.

 ` You can't enlarge the subtitle and PG graphic 

in the full screen mode.

Appendix

Before requesting service, please try the following solutions.

PROBLEM

SOLUTION

No operation can be 

performed with the remote 

control.

•  Check the batteries in the remote control. They may need replacing.

•  Operate the remote control at a distance of no more than 20 feet.

•  Remove batteries and hold down one or more buttons for several minutes 

to drain the microprocessor inside the remote control to reset it. Reinstall 

batteries and try to operate the remote control again.

Disc does not play.

•  Ensure that the disc is installed with the label side facing up.

•  Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear.

•  Ensure that the disc has disc menus.

The prohibition message 

appears on the screen.

•  This message appears when an invalid button is pressed.

•  The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

•  You’ve requested a title or chapter number or search time that is out of range.

Play mode differs from the 

Setup Menu selection.

•  Some of the functions selected in the Setup Menu may not work properly if 

the disc is not encoded with the corresponding function.

The screen ratio cannot be 

changed.

•  The Screen Ratio is fixed on your Blu-ray Disc/DVD.

•  This is not a problem with the player.

No audio.

•  Make sure you have selected the correct Digital Output in the Audio Options 

Menu.

The screen is blank.

•  If the HDMI output is set to a resolution your TV cannot support (for example, 

1080p), you may not see a picture on your TV.

•  Press the @ button (on front panel) for more than 5 seconds with no disc 

inside. All settings will revert to the factory settings.

•  When the factory default settings are restored, all stored user BD data is 

deleted.

 

 Select      ( ) Jump Page     ' Return

1/2 Page

Music

TRACK 001

CD

TRACK 001
02:38

TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38

TRACK 001
02:38

TRACK 001
02:38

TRACK 001
02:38
TRACK 001
02:38
TRACK 001
02:38