BMW 2010 M6 Convertible Manual Do Proprietário

lity

205

riv

g ti

uni

iga

License plate lamps

5-watt bulb, W5W

Push a screwdriver from the left under the
lamp and pry out the lamp toward the right.

Turn the bulb holder to the left by 90

5 and

remove.

Remove and replace the bulb.

Repairing flat tire with

M Mobility System

To repair a flat tire, an M Mobility System is pro-
vided in the BMW M6. Using this system you
can apply a sealant in the inside of the tire, seal
off the damaged area, restore the tire inflation
pressure and then continue driving.

Safety measures in case of a breakdown:
Park the vehicle as far as possible from

passing traffic and on solid ground. Switch on
the hazard warning flashers.
Apply the parking brake and shift into first gear
or reverse with the manual transmission, or
move the selector lever into a drive position with
the sequential transmission. Have all vehicle
occupants get out of the vehicle and ensure
that they remain outside the immediate area in a
safe place, such as behind a guardrail.
If a warning triangle

or portable hazard warning

lamp

is required, set it up on the roadside at an

appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.

Preparation

The M Mobility System is located in the cargo
area under the floor panel flap.
Do not remove foreign bodies which have pen-
etrated the tire if possible.

Corresponding information on using the
M Mobility System is also provided on the

device.

Before using the M Mobility System,
observe the information on the sealant

bottle.

Pull the sticker for the speed limit off the sealant
bottle and apply it to the steering wheel.

Please observe the best-by date on the
sealant bottle.

The M Mobility System consists of

1 Sealant bottle and sticker with speed limit
2 Filling hose from sealant bottle to wheel