Bose Acoustimass 6 Series III system Manual Do Proprietário

 

1.

Connect the wire pair marked 

 

 to the center cube speaker (Figure 5). Press the termi-

nal tab on the back of the cube speaker. Insert the marked (+) wire into the red terminal and 
the plain (–) wire into the black terminal. Release the tab to secure the wires.

 

2.

Connect the wire pair marked 

 

 to the right front cube speaker (to the right of the 

TV as you face it). 

3.

Connect the wire pair marked 

 

 to the left front cube speaker.

 

4.

Plug the other end of each cable into the 

 

, 

 

, and 

 

 blue 

RCA jacks, respectively, on the Acoustimass

 

®

 

 module.

 

Each rear cube speaker is connected to the Acoustimass module with a 50-foot (15 m) 
speaker cable (Figure 5). Be sure to match the correct cable with the corresponding speaker 
location. Rear speaker cables have orange RCA connectors at one end with 

 

 (left rear) and 

 

 (right rear) molded into the connectors. The other ends of the cables have two wires. The 

red collars on the + wires are labeled 

 

 and 

 

.

1.

Connect the wire pair marked 

 

 to the right rear cube speaker (on your right 

as you face the TV). See Figure 5. Press the terminal tab on the back of the cube speaker. 
Insert the marked (+) wire into the red terminal and the plain (–) wire into the black termi-
nal. Release the tab to secure the wires.

2.

Connect the wire pair marked 

 

to the left rear cube speaker.

3.

Plug the other end of each cable into the 

 

 and

 

 orange RCA jacks, 

respectively, on the Acoustimass module.