Manuais de utilizador para Bose Acoustimass 6 Series III system

índice analítico

• Additional safety information

  2
• Please read this owner’s guide

  2
• Where to find …

  3
• Before you begin

  4
• Unpacking the carton

  4
  • 1. Remove the brown inner carton containing the cube speakers.

    4
  • 2. Gently roll the carton over onto its side.

    4
  • 3. Slowly pull the Acoustimass module from the carton.

    4
  • 4. Gently stand the module up.

    4
  • Figure 1

    5
    • Carton contents

      5
• Placing your speakers to achieve realistic home theater sound

  5
  • Figure 2

    6
    • A suggested home theater layout

      6
  • Figure 3

    6
    • Room reflection diagram

      6
      • Front center cube speaker

        6
      • Front left and right cube speakers

        7
      • Rear cube speakers

        7
      • Powered Acoustimass module

        7
  • Figure 4

    7
    • Powered Acoustimass module placement

      7
• Connecting the speakers

  8
  • Connecting front cube speakers to the Acoustimass module

    8
  • Figure 5

    8
    • Cube speaker connections to Acoustimass module

      8
      • 1. Connect the wire pair marked CENTER to the center cube speaker (Figure 5). Press the terminal ...

        9
      • 2. Connect the wire pair marked RIGHT to the right front cube speaker (to the right of the TV as ...

        9
      • 3. Connect the wire pair marked LEFT to the left front cube speaker.

        9
      • 4. Plug the other end of each cable into the Center Front, Right Front, and Left Front blue RCA j...

        9
      • Connecting rear cube speakers to the Acoustimass module

        9
        • 1. Connect the wire pair marked RIGHT REAR to the right rear cube speaker (on your right as you f...

          9
        • 2. Connect the wire pair marked LEFT REAR to the left rear cube speaker.

          9
        • 3. Plug the other end of each cable into the Right Rear and Left Rear orange RCA jacks, respectiv...

          9
      • Connecting the Acoustimass® module to the receiver

        10
        • 1. Insert the multi-pin connector on the system input cable into the input jack on the Acoustimas...

          10
        • 2. Connect each wire pair on the other end of the system input cable to your surround receiver. C...

          10
        • 3. If applicable, connect the RCA plug on the system input cable to the LFE/SUBWOOFER OUT jack on...

          10
  • Figure 6

    11
    • Acoustimass® module to receiver connections

      11
• Checking the connections

  12
• Connecting the Acoustimass module to power

  12
• For realistic home theater sound

  13
  • Adjusting the LFE level (low frequency effects)

    13
  • Adjusting the bass/room compensation level

    13
• Setting your digital surround sound receiver

  13
• Be sure to get the digital audio signal

  14
  • Figure 7

    14
    • Digital signal connections on a surround receiver

      14
• Setting your analog surround sound receiver

  14
• Troubleshooting

  15
• Customer service

  15
• Cleaning the speakers

  16
• Technical information

  16
  • Finish

    16
  • Acoustimass module power rating

    16
  • Speaker driver complement

    16
  • Connectivity

    16
  • Size

    16
  • Weight

    16
• Warranty period

  17
• Accessories

  17