Whirlpool WFI910H0AS Manual Do Proprietário

This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic field. It has been tested 
and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to minimize 
interference with other devices in residential installation.

This induction cooktop may cause interference with television or radio reception. If interference occurs, the user should try to correct the 
interference by:

Relocating the receiving antenna of the radio or television.

Increasing the distance between the cooktop and the receiver.

Connecting the receiver into a different outlet.

It is the user’s responsibility to correct any interference.

NOTE: People with a pacemaker or similar medical device should use care when standing near this induction cooktop while it is on. The 
electromagnetic field may affect the pacemaker or similar device. Consult your doctor, or the manufacturer of the pacemaker or similar 
medical device for additional information about its effects with electromagnetic fields of the induction cooktop.

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked 
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions.

This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press SETTINGS once.
2. Press START to change the time.
3. Press “3” for AM or “6” for PM.
4. Press the number keypads to set the time of day.
5. Press START.

While the oven door is closed, press the OVEN LIGHT keypad to turn the light on and off. The 
oven light will come on when the oven door is opened. 

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER.
2. Press the number keypads to set the length of time in hr-hr-min-min. Leading zeroes do not 

have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER or START to begin the countdown. If enabled, end-of-cycle tones will sound at 

end of countdown.

4. Press TIMER twice to cancel the Timer and return to the Time of Day. Do not press the 

Cancel keypad because the oven will turn off.

5. If the Timer is running, but not in the display, press TIMER to display the countdown for 

5 seconds.

The Start pad begins any oven function. If Start is not pressed within 30 seconds after pressing 
a keypad, the function is canceled and the time of day is displayed.

The Cancel keypad stops any oven function except the Clock, Timer, Control Lock and Warming 
Drawer.