Whirlpool WFI910H0AS Manual Do Proprietário

Induction cooking is quite different from traditional forms of 
cooking. The heat is generated directly in the pan, keeping the 
cooking surface cooler than with a traditional element.
Induction cooking does not lose as much heat as traditional forms 
because all the heat is created in the pan itself.
The cooktop heats up or cools down quickly after the controls are 
set. It also stops heating when the pan is removed without turning 
off the power.
Food spilled on the cooktop surface will not burn because the 
glass is not heated. Induction cooking allows for immediate 
cleaning after use because the heat is created in the pan.
Pan size, material (see “Cookware” section), and positioning are 
very important to achieve maximum wattage.
The diameter of the pan’s base should be equal to the size of the 
element.
If the pan is too small, the burner does not sense the pan and will 
not activate.

The touch-activated electronic controls offer a variety of heat 
settings for optimal cooking results. When melting foods such as 
chocolate or butter, the surface cooking area can be set to the Melt 
and Hold function for minimal surface cooking area operation.

For maximum surface cooking area operation, all cooktop touch-
activated electronic controls can be set to Performance boost 
function when bringing liquids to a fast and rapid boil. Select the 
desired surface cooking area, then press “Boost” to immediately 
reach the highest setting.
NOTE: Where 240V installation is not available, this cooktop will 
automatically adjust to 208V operation.

The cooktop can be locked to avoid unintended use. To lock the 
control panel, press and hold LOCK for 3 seconds. An indicator 
light above Lock will turn on. To unlock the control panel, press and 
hold LOCK for 3 seconds. The indicator light will turn off, and the 
cooktop is ready for use.

1. Press POWER.

The indicator light above the Power keypad and a dash (“-”) in 
each surface cooking area will light to indicate that each 
surface cooking area is ready to be activated.

Inactivity for 60 seconds after the main power has been turned 
on will automatically turn off the power to the cooktop.

If a cooking function or the power slider is touched without first 
selecting a surface cooking area, all dashes (one for each zone) 
will flash and an invalid tone will sound 3 times.

2. Touch directly on the display area for the surface cooking area 

you want to use. See D, E, I and J of previous illustration.
The current power level and indicator light will flash for 
10 seconds then remain on. 

Touching any other feature or the power slider stops the 
flashing, and information for the keypad that was touched will 
be displayed.

When a surface cooking area is selected, the timer will also turn 
on to show that it can now be set. 

When a surface cooking area is left at the “0” power level for 
30 seconds, the surface cooking area will automatically turn off 
and display only the middle dash without the indicator light. 

A

B

C

E

D

F

G

H

I

J

K

L

M