Whirlpool TES325MQ1 Manual Do Utilizador

Página de 20
10
Start/Enter
The Start/Enter pad begins any oven function. If the Start/Enter 
pad is not pressed within 5 seconds after pressing a function 
pad, the “Start?” indicator light will flash as a reminder.
If Start/Enter is not pressed within 1 minute after pressing a 
function pad, the oven display will return to the time of day mode 
and the programmed function will be canceled.
Off/Cancel
The Off/Cancel pad stops any function except the Clock, Timer 
and Control Lock.
The cooling fan may continue to operate after an oven function 
has been canceled, depending on oven temperature.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Press the TEMP/TIME “up” or “down” arrow pad to set the 
time of day.
Press START/ENTER or CLOCK.
Tones
Tones are audible signals, indicating the following:
One tone
Valid pad press
Oven is preheated (long tone)
Function has been entered
Reminder, repeating each minute after the end-of-cycle tones
Three tones
Invalid pad press
Four tones
End of cycle
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to 
Celsius on some models.
To Change: Press and hold CUSTOM BROIL for 5 seconds. A 
tone will sound, and “°C” will appear on the display. Repeat to 
change back to Fahrenheit. To exit mode, press OFF/CANCEL.
Timer
The Timer can be set in hours or minutes up to 12 hours and 
59 minutes and counts down the set time. 
NOTE: The Timer does not start or stop the oven.
To Set:
1. Press TIMER CANCEL*.
The timer oven indicator light will light up. If no action is taken 
after 1 minute, the display will return to the time of day mode.
2. Press the TEMP/TIME “up” or “down” arrow pad to set the 
length of time.
3. Press START/ENTER.
When the set time ends, four 1-second tones will sound.
4. Press TIMER CANCEL* anytime to cancel the timer and/or 
stop reminder tones. To cancel the timer during the 
countdown, press TIMER CANCEL* twice.
The time can be reset during the countdown by repeating the 
above steps. To display the time of day when the timer is 
counting down, press CLOCK.
Control Lock
The Control Lock shuts down the control panel pads to prevent 
unintended use of the oven.
When the control is locked, only the Clock and Timer pads will 
function.
To Lock/Unlock Control: Before locking, make sure the oven 
and Timer are off. Touch and hold START/ENTER for 5 seconds. 
A single tone will sound, and “LOC” and “LOCK’D” (on some 
models) will appear on the display. “LOC” will also appear 
whenever any command pad is pressed while the control is 
locked. 
Repeat to unlock. “LOC” and “LOCK’D” (on some models) will 
disappear from the display.