WHP Wireless DL360 Manual Do Utilizador

10.  Be sure that the front panel external health LED is green ("Front Panel LEDs 

and Buttons" on page 

 

For instructions on installing a RILOE II board, refer to the HP Remote Insight 
Lights-Out Edition II User Guide on the Documentation CD. 

IMPORTANT:  The optional RILOE II board can be installed only in 
slot 2. If you plan to install a RILOE II board in the future, leave slot 2 
unpopulated. 

 

PCI-X expansion slot 1 

Half-length 

133 MHz, 3.3 V 

64-bit 

PCI-X expansion slot 2 

Full-length 

133 MHz, 3.3 V 

64-bit 

PCI Express expansion 
slot 1 (optional) 

Half-length 

x8 

x1, x4, or x8 

PCI Express expansion 
slot 2 (optional) 

Full-length 

x8 

x1, x4, or x8 

 

 

1.  Power down the server ("Powering Down the Server" on page 

2.  Extend the server from the rack, if applicable ("Extending the Server from 

the Rack" on page 

3.  Remove the access panel ("Removing the Access Panel" on page 

4.  Remove the PCI riser board assembly. 

5.  Remove the expansion board.