WHP Wireless DL360 Manual Do Utilizador

 
  
  

 

After the auto-configuration process completes, or after the server reboots upon 
exit from RBSU, the POST sequence runs, and then the boot option screen is 
displayed. This screen is visible for several seconds before the system attempts to 
boot from either a diskette, CD, or hard drive. During this time, the menu on the 
screen allows you to install an operating system or make changes to the server 
configuration in RBSU. 

 

BIOS Serial Console allows you to configure the serial port to view POST error 
messages and run RBSU remotely through a serial connection to the server COM 
port. The server that you are remotely configuring does not require a keyboard 
and mouse.  

For more information about BIOS Serial Console, refer to the BIOS Serial 
Console User Guide on the Documentation CD or the HP website 
(

 

To configure online spare memory:  

1.  Install the required DIMMs. 

2.  Access RBSU by pressing the F9 key during powerup when the prompt is 

displayed in the upper right corner of the screen. 

3. Select 

System Options. 

4. Select 

Advanced Memory Protection. 

5. Select 

Online Spare with Advanced ECC Support. 

6. Press 

the 

Enter key. 

7. Press 

the 

Esc key to exit the current menu or press the F10 key to exit 

RBSU. 

For more information on online spare memory, refer to the white paper on the HP 
website