WHP Wireless DL360 Manual Do Utilizador

NOTE:  The server ships with the same version programmed on each 
side of the ROM. 

 

When you flash the system ROM, ROMPaq writes over the backup ROM and 
saves the current ROM as a backup, enabling you to switch easily to the alternate 
ROM version if the new ROM becomes corrupted for any reason. This feature 
protects the existing ROM version, even if you experience a power failure while 
flashing the ROM. 

 

To access the redundant ROM through RBSU: 

1.  Access RBSU by pressing the F9 key during powerup when the prompt is 

displayed in the upper right corner of the screen. 

2. Select 

Advanced Options. 

3. Select 

Redundant ROM Selection. 

4.  Select the ROM version. 

5. Press 

the 

Enter key. 

6. Press 

the 

Esc key to exit the current menu or press the F10 key to exit 

RBSU. The server restarts automatically. 

To access the redundant ROM manually: 

1.  Power down the server ("Powering Down the Server" on page 

2.  Remove the access panel ("Removing the Access Panel" on page 

3.  Set positions 1, 5, and 6 of the system maintenance switch to On. 

4.  Install the access panel ("Installing the Access Panel" on page 

5.  Power up the server ("Powering Up the Server" on page 

6.  Wait for the server to emit two beeps. 

7.  Repeat steps 1 and 2. 

8.  Set positions 1, 5, and 6 of the system maintenance switch to Off. 

 
  
  

9.  Repeat steps 4 and 5.