Sony NAS-SV20DI Manual Do Utilizador
27
GB
Ne
twor
twor
k co
nne
ction
s
2
When “Playback and network
functions cannot be used during
the setup. Press ENTER to
continue.” appears, press ENTER.
functions cannot be used during
the setup. Press ENTER to
continue.” appears, press ENTER.
When “
” is displayed, the message is
continued to the next page. Press
m to see the
entire text string.
3
Select “Connection Method.”
The “Connection” display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 21), this
display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 21), this
display appears.
4
Select “Wireless LAN.”
5
Select “Access Point Scan.”
The unit automatically starts searching for
access points and displays a list of network
names (SSIDs) of available access points.
The unit can display a maximum of 20
network names (SSIDs) on the list.
access points and displays a list of network
names (SSIDs) of available access points.
The unit can display a maximum of 20
network names (SSIDs) on the list.
6
Select the network name (SSID)
from the list.
from the list.
If the desired network name (SSID) does not
appear on the display, or if a network name
(SSID) cannot be detected, press BACK so
that the unit returns to step 5, then perform
step 5 again. If the network name (SSID) still
does not appear or still cannot be detected,
you can input the network name (SSID)
manually. See “If you cannot find the desired
network name (SSID) (manual setup
method)” (page 27).
appear on the display, or if a network name
(SSID) cannot be detected, press BACK so
that the unit returns to step 5, then perform
step 5 again. If the network name (SSID) still
does not appear or still cannot be detected,
you can input the network name (SSID)
manually. See “If you cannot find the desired
network name (SSID) (manual setup
method)” (page 27).
7
Enter the security key (WEP Key,
WPA/WPA2 Key) of your network,
and then press ENTER.
WPA/WPA2 Key) of your network,
and then press ENTER.
For details on how to input characters, see
“Entering text” (page 19).
The security key appears as “*****”.
“Entering text” (page 19).
The security key appears as “*****”.
Note
If your network has not been secured by encryption
(using the security key), the security key insertion
display does not appear.
(using the security key), the security key insertion
display does not appear.
8
When “Save settings and check
connection. Press ENTER to
continue.” appears, press ENTER.
connection. Press ENTER to
continue.” appears, press ENTER.
It may take a while for the unit to complete
the network settings.
When the network settings have been
completed, “Complete.” appears and
the network settings.
When the network settings have been
completed, “Complete.” appears and
lights up on the display.
If you are making the initial settings, the
“Date&Time” display, step 5 of “Performing
initial setup operations,” appears. Go back to
page 22 and continue the initial setting
process.
If you are making the initial settings, the
“Date&Time” display, step 5 of “Performing
initial setup operations,” appears. Go back to
page 22 and continue the initial setting
process.
9
Make the server settings.
To listen to audio content stored on the server
through the network that have set up in this
section, you need to set up your server
(page 38).
through the network that have set up in this
section, you need to set up your server
(page 38).
Tip
You can view information on the access points when a list
of network names (SSIDs) is displayed on step 5.
Place the focus on the access point (network name
(SSID)) for which you want to view the information and
press OPTIONS. Select “Information” from the options
menu. You can check “SSID” (network name), “Signal
Strength,” and “Security Method” (WPA2, etc.) for the
selected access point.
of network names (SSIDs) is displayed on step 5.
Place the focus on the access point (network name
(SSID)) for which you want to view the information and
press OPTIONS. Select “Information” from the options
menu. You can check “SSID” (network name), “Signal
Strength,” and “Security Method” (WPA2, etc.) for the
selected access point.
If you cannot find the desired
network name (SSID) (manual
setup method)
network name (SSID) (manual
setup method)
If the desired network name (SSID) does not
appear in the list of network names (SSIDs), you
can enter the network name (SSID) manually.
appear in the list of network names (SSIDs), you
can enter the network name (SSID) manually.
1
Press SETTINGS to enter the
settings menu and select “Network
Settings.”
settings menu and select “Network
Settings.”
2
When “Playback and network
functions cannot be used during the
setup. Press ENTER to continue.”
appears, press ENTER.
functions cannot be used during the
setup. Press ENTER to continue.”
appears, press ENTER.