Sony NAS-SV20DI Manual Do Utilizador

GB

When “

” is displayed, the message is 

continued to the next page. Press 

m to see the 

entire text string.

Select “Connection Method.”

The “Connection” display appears.
If you are performing the initial setup 
operation and indicated that you want to set 
the network connection (page 21), this 
display appears.

Select “Wireless LAN.”

Select “Manual Registration” - 
“Direct Input.”

Enter the network name (SSID), and 
then press ENTER.

For details on how to input characters, see 
“Entering text” (page 19).

Select the security setting from the 
“Security Setting” display.

You can select from “WPA/WPA2-PSK 
(AES),” “WPA/WPA2-PSK (TKIP),” 
“WEP,” or “None.”

If you select “None,” the unit skips step 8 and goes 
to step 9.

Enter the security key (WEP Key, 
WPA/WPA2 Key) of your network, 
and then press ENTER.

For details on how to input characters, see 
“Entering text” (page 19).
The security key appears as “*****”.

When “Save settings and check 
connection. Press ENTER to 
continue.” appears, press ENTER.

It may take a while for the unit to complete 
the network settings.
When the network settings have been 
completed, “Complete.” appears and 

 

lights up on the display.
If you are making the initial settings, the 
“Date&Time” display, step 5 of “Performing 
initial setup operations,” appears. Go back to 
page 22 and continue the initial setting 
process.

Make the server settings.

To listen to audio content stored on the server 
through the network that have set up in this 
section, you need to set up your server 
(page 38).

You can easily set up a wireless network using an 
access point compliant with WPS. WPS setting can 
be made either by the push-button configuration 
method or the PIN (Personal Identification 
Number) code method.

WPS is a standard created by the Wi-Fi Alliance 
allowing you to setup a wireless network easily 
and securely.

You can easily set up a WPS wireless connection 
with one push of the designated button.

Press SETTINGS to enter the 
settings menu and select “Network 
Settings.”

When “Playback and network 
functions cannot be used during the 
setup. Press ENTER to continue.” 
appears, press ENTER.

When “

” is displayed, the message is 

continued to the next page. Press 

m to see the 

entire text string.

Select “Connection Method.”

The “Connection” display appears.
If you are performing the initial setup 
operation and indicated that you want to set 
the network connection (page 21), this 
display appears.

Select “Wireless LAN.”

Select “WPS Push.”