Roku SoundBridge Manual Do Utilizador
6
7
III. Hooking Up SoundBridge to Your Speakers or Stereo System
Both end caps of your SoundBridge unit are removable. The right end cap covers the audio
connectors and AC power connector, the left one holds an Ethernet connector and your Wi-Fi
Network adapter CompactFlash slot (Wi-Fi adapter may be sold separately depending on your
SoundBridge model).
connectors and AC power connector, the left one holds an Ethernet connector and your Wi-Fi
Network adapter CompactFlash slot (Wi-Fi adapter may be sold separately depending on your
SoundBridge model).
Remove the right end cap to connect audio cables by gently pressing on the flat part of the end
cap, while pressing on the dimpled tabs in the back of the end cap, and pivot backward.
cap, while pressing on the dimpled tabs in the back of the end cap, and pivot backward.
Once removed, your right end cap will reveal the connectors shown above.
Your SoundBridge has several audio connection options:
a. Connect your SoundBridge to a set of powered speakers, using the RCA-to-mini (1/8
inch) Y-audio cable included with your SoundBridge.
��������������������
�������������������
����������������������
���������������������
���������
������������
���������������
�����������
����������������
���������������������������
�����������
������������������
�������������
������������������������������
b. Connect your SoundBridge to your stereo system’s Aux or other “Line Input,” using an
RCA (white/red) audio cable (not included).
PC or Mac with
music files
Ethernet Cable
(not needed if
Connect 1 of the following:
(1) Optical “Toslink” SPDIF from
(1) Optical “Toslink” SPDIF from
SoundBridge to receiver
(2) Black SPDIF Coax (RCA) to “Coax
Digital In” on your receiver
(3) Two analog RCA jacks (white and
red) to “Line In” on your receiver
Power Cable
������������������
�������������
����������������������
c. Connect to your stereo system using either coaxial SPDIF digital or optical SPDIF digital
(the SoundBridge has connectors for both) — cables not included.
When you are finished connecting your SoundBridge, be sure to replace the end caps.
Ethernet port
Insert your Wi-Fi
card with the Roku
label facing the
Ethernet port
card with the Roku
label facing the
Ethernet port
AC Power
RCA Analog Out
Digital SPIF Coax
Optical Toslink
SoundBridge, left end cap removed
SoundBridge, right end cap removed