Charmglow 720-0289 Manual Do Utilizador

Rotisserie motor will not turn

--Check the voltage at the outlet.

--If an extension cord is required, ensure it is a 16

gauges, grounded cord.

--Ensure the on/off switch is on.

--Ensure the load does not exceed the 40 pounds

operational capacity.

--Ensure the spit is fully inserted in the motor.

--Ensure there is no encumbrance or drag.

Grill only heats to 200-300 degrees.

--Ensure the temperature gauge is functioning

properly. Hold a flame to the probe or compare

the grill gauge to an oven thermometer place in

the grill.

--Ensure correct start procedure. Prior to lighting

grill, the gas control knobs should be off. The

propane bottle should be off. If not, wait 15

minutes. Turn tank all the way on.. Turn left

burner to ignite, wait 5 seconds ignite. Repeat for

additional burners.

--Check all gas connections for leaks with bubble

test. If leaks are found, replace the part or tighten

the fitting.

Grill takes a long time to preheat.

--Normal preheat 500-600degrees, takes about

10-15 min. Cold weather and wind may effect

your preheat time.

--If you are using volcanic rock or briquettes they

can increase the preheat time and maximum

temperature.

Burner flames are not light blue.

--Too much or not enough air mixes for the flame.

--Elevation is the principal cause, however cold

weather can affect the mixture. Burner

adjustment may be required. Refer to manual for

adjustment procedures.

--Grill is in a windy location.

K15Y06P-1