Charmglow 720-0289 Manual Do Utilizador

 

20

Clean the exterior of the burner with a wire brush. Clear any clogged burner ports with a straightened   

paper clip. Never enlarge the burner ports. Never use a wooden toothpick as it may break off and clog   

the port.

There are many different stainless steel cleaners available. Always use the mildest cleaning procedure   

first, scrubbing in the direction of the grain. Do not use steel wool, as it will scratch the surface. To 

touch up noticeable scratches in the stainless steel, sand very lightly with dry 100 grit sand paper in the   

direction of the grain. 

The top burner grate is stainless steel. To avoid burns do not clean a hot grate. They may be wiped   

while in place with hot, soapy water, rinsed and wiped dry. Never immerse a hot grate in water. 

Step 1. Locate the burner onto the orifice. 

Step 2. Secure the main burner on the back wall of fire box with 2 screws.     

Spiders and insects can nest in the burners of the grill 

and cause the gas to flow from the front of the burner. 

This is a very dangerous condition, which can cause a 

fire to occur behind the valve panel, thereby damaging 

the grill and making it unsafe to operate. 

 

You should inspect the burners at least once a year or 

immediately after any of the following conditions occur: 

1.  The smell of gas in conjunction with the burner 

flames appearing yellow. 

2.  The grill does not reach temperature. 

3.  The grill heats unevenly. 

4.  The burners make popping noises. 

 

If the grill does not function properly, use the following 

checklist before contacting your dealer for service. You 

may save the cost of a service call. 

K15Y06P-1