Centurion CP72SR5 Manual Do Utilizador
24
1
2
3
4
5
6
1- Gate starts at “crawl” speed to open
gate.
NB. If gate closes, remove power and
reverse motor wires (see page 20)
gate.
NB. If gate closes, remove power and
reverse motor wires (see page 20)
2- Gate hits “open” end stop and reverses
direction running at crawl speed.
direction running at crawl speed.
3 - Gate hits “closed” end stop and
reverses direction running at “FULL”
speed until the marker, then at
CRAWL speed to end.
reverses direction running at “FULL”
speed until the marker, then at
CRAWL speed to end.
4 - Gate hits “open” end stop and
reverses but now runs at “FULL”
speed.
reverses but now runs at “FULL”
speed.
5 - As gate sensor passes the motor, the
speed reduces to CRAWL. Gate hits
“closed” end stops and reverses
at FULL SPEED.
speed reduces to CRAWL. Gate hits
“closed” end stops and reverses
at FULL SPEED.
6 - Gate stops at “pedestrian” (PED)
position. If required, widen PED
opening by pulsing PED input.
position. If required, widen PED
opening by pulsing PED input.
D3/D5 MOTOR AUTOMATIC SET-UP