Centurion CP72SR5 ユーザーズマニュアル

1- Gate starts at “crawl” speed to open
    gate.
NB. If gate closes, remove power and 
       reverse motor wires (see page 20)

2- Gate hits “open” end stop and reverses
    direction running at crawl speed.

3 - Gate hits “closed” end stop and
    reverses direction running at “FULL” 
    speed until the marker, then at 
    CRAWL speed to end.

4 - Gate hits “open” end stop and
    reverses but now runs at “FULL” 
    speed.

5 - As gate sensor passes the motor, the
     speed reduces to CRAWL. Gate hits
     “closed” end stops and reverses 
     at FULL SPEED.
     

6 - Gate stops at “pedestrian” (PED)
     position. If required, widen PED 
     opening by pulsing PED input.