ZyXEL M-302 Manual Do Utilizador

M-302 User’s Guide

Chapter 4 ZyXEL Utility Configuration

39

When you configure the M-302 to connect to a network with wireless security activated and 
the security settings are disabled on the M-302, the screen varies according to the encryption 
method used by the selected network.

Figure 23   Security Settings: WEP 

The following table describes the labels in this screen.  

Security

This field shows whether data encryption is activated. If WPA is activated, WPA 

displays. If WPA-PSK is activated, WPA-PSK displays. If WEP or 802.11x is 

activated, WEP displays. If security is inactive, Disable displays.

MAC Address 

This field displays the MAC address of the wireless device.

Surveyed at 

This field displays the time when the wireless device is scanned.

Table 7   Site Survey

Table 8   Security Settings: WEP 

WEP

Select 64 Bits, 128 Bits or 152 Bits to activate WEP encryption and then fill in the 

related fields.

Authentication 

Type

Select authentication type. Choices are Auto Switch, Open and Shared. Refer to 

for more information.

Pass Phrase

Enter a passphrase of up to 63 case-sensitive printable characters. As you enter 

the passphrase, the M-302 automatically generates four different WEP keys and 

displays it in the key field below. Refer to 

 for more 

information.
At the time of writing, you cannot use passphrase to generate 152-bit WEP keys.

Transmit Key

Select a default WEP key to use for data encryption. The key displays in the field 

below.