ZyXEL M-302 Manual Do Utilizador

M-302 User’s Guide

Chapter 4 ZyXEL Utility Configuration

41

The following table describes the labels in this screen. 

Figure 25   Security Settings: WPA-PSK

Table 9   Security Settings: WPA

Encryption Type

The encryption mechanisms used for WPA and WPA-PSK are the same. The only 

difference between the two is that WPA-PSK uses a simple common password, 

instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Authentication 

Type

Select an authentication method from the drop down list. Options are TLS, TTLS 

and PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.

Password

This field is not available when you select TLS in the Authentication Type field. 
Enter the password associated with the user name above. 

Certificate

This field is only available when you select TLS in the Authentication Type field. 
Select a certificate used by the authentication server to authenticate the M-302.

Note: You must first have a wired connection to a network and 

obtain the certificate(s) from a certificate authority (CA). 

Server CA

Select a certificate authority (CA) that you trust and accept any certificates signed 

by that CA.
Otherwise, select Trust Any to accept certificates from any CA.

PEAP Inner EAP

This field is only available when you select PEAP in the Authentication Type field.
Select a PEAP protocol. Options are GTC and MS CHAP v2.

Back

Click Back to go to the

 

Site Survey screen to select and connect to other network.

Next

Click Next to confirm your selections and advance to the Confirm Save screen.

Exit

Click Exit to return to the Site Survey

 

screen without saving.