Vivitek DVR5612 Manual Do Utilizador

2

 

 

For the reason of safety, please make sure to unplug the power cord before start to do the cleaning.

■ To mop the outside of the case with soft and clean cloth. Follow the instruction if use  

  any cloth containing certain chemical materials.

■ Do not use alcohol or other material inflammable, which will result in the decay of  

  the case or paint fading.

■ Do not use robber or other clue-related material to interface with the case. It possibly  

  will leave scar on the case.

■ Please clean up the dust on the surface of the monitor with soft cloth or other similar  

  material and then clean the monitor with dry and soft cloth again.

■ It’s prone to get scratch on the surface of the monitor so do not rub or knock the  

  surface with hard material. Also, do not use any diluted detergent to scrape or clean  

  the monitor.

Please do not leave the machine without filter installed or the have a dirty filter owing to lack of periodically

cleanup. It’s because the filter is to prevent the dust or other objects from going into the internal of the

machine.  And keep the machine in a good ventilation condition. It will result in the rise of temperature in the 

machine and even cause a fire or damage if the filter with dust does not be replaced for a long period of time.

The filters are supplies and please contact the resellers for details if you need to replace the filter.

 

Please contact the reseller for information about replacement or cleanup of 

the filter within 1 year. The outgoing or incoming vent hole should be cleaned 

periodically.

 

Filter

Step 3.  Put the filter cover back and Screw

the filter on the back of the machine

Step :  Loose this tow    

Screw on the filter cover

Step 2 : Take out the used  

filter and put new filters on

4 slots

Filter

Slot