Vivitek DVR5612 Manual Do Utilizador

  

Projection lamps are supplies and have life span. Please contact the resellers when the image turns dark or

color gets deteriorated. When this happens, please replace it with a new projection lamp. If the projection

lamp could not light up and have noise, the possible reasons are:

1.The life span for the projection lamp are ended or

2.Shutting down the TV right after the turn-on of power. At the moment, the temperature  

 of projection lamp is too high and does not cool down to certain degree. Turn it on  

  after a few minutes and it will work properly. or 

3.The projection lamp does not connect correctly with the lamp cradle.

 

Beware of the high temperature when 
replace the projection lamp.

 

    

Eye damage may result from Directly viewing the light

produced by the lamp used in this apparatus. Always turn 

off lamp before opening this cover.

.Loose the screw 

on lamp cover

Caution: After taking the projection lamp out, do not place any metal substance into the lamp  

cradle. Do not touch the lamp cradle or it’s easy to get burned or cause fire.

Caution: Do not touch the glass surface of the new projection lamp because it possibly will  

affect the quality of resolution and decrease the life span of the projection lamp.

Caution: Make sure to screw the screws firmly in order to prevent the shaking of the lamp,  

 

 which will result in poor connection.

Caution: Put the discarded used projection lamp in the packaging box of the new projection  

 

  lamp and handle it with case and compliant to local regulation. Please do not have  

 

  kids to access the discarded lamps to prevent any danger. 

Lamp

2.Then loose the

screw on lamp 

.Pull out the lamp directly

4.Then put the new lamp into this unit. (Follow 

the  reverse the way you took it out.)