Ricoh feeder Manual Do Utilizador

When the Machine Does Not Operate As wanted

8

When an indicator to the left of a function key lights up, press the corresponding
function key. Then, follow the instructions displayed on the control panel.

❒ If an error occurs in the function you are using, check the message that ap-

pears on the control panel, and then refer to “When a Message is Displayed”
for the relevant function.

Documents and reports 
do not print out.

The paper output tray is 
full.

Remove the paper from the tray.

Documents and reports 
do not print out.

There is no copy paper 
left.

An error has occurred.

The function whose indi-
cator is lit is defective.

Record the code number shown in the 
display and contact your service repre-
sentative. See “When a Message dis-
played” of each chapter.

You can use other functions normally.

The machine is unable to 
connect to the network.

A network error has oc-
curred.

• Check the displayed message and 

take an appropriate action. See 
“When a Message displayed” of 
each chapter.

• Check that the machine is correctly 

connected to the network, and that 
the machine is correctly set. See 
“Network Settings”, General Set-
tings Guide.

• Contact the administrator.

• When the function key is still lit, 

even if you take the measures 
above, contact your service repre-
sentative.