Ricoh feeder Manual Do Utilizador

When You Have Problems Operating the Machine

9

The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.

❒ Check the contact address and Serial No. of Machine shown in the call service

message, and then contact your service representative.

Although the copier 
screen appears when the 
machine is turned on us-
ing the main power 
switch, it cannot be 
switched to another 
screen by pressing the 
{Printer} or {Scanner} key.

Functions other than the 
copier function are not 
yet ready. 

Wait a little longer.

The machine has just 
been turned on and the 
User Tools screen is dis-
played, but the User 
Tools menu has items 
missing.

Functions other than the 
copier function are not 
yet ready. Time required 
varies by function. Func-
tions appear in the User 
Tools menu when they 
become ready for use.

Wait a little longer.

The main power indica-
tor continues blinking 
and does not turn off 
when pressed.

This occurs in the follow-
ing cases:

• ADF is open.

• The machine is com-

municating with ex-
ternal equipment.

• The hard disk is ac-

tive.

Close ADF, and check if the machine is 
communicating with a computer.

The display is off.

The machine is in Energy 
Saver mode.

Press the {Energy Saver} key to cancel 
Energy Saver Mode. mode.

The display is off.

The operation switch is 
turned off.

Turn on the operation switch.

Nothing happens when 
the operation switch is 
turned on.

The main power switch is 
turned off.

Turn on the main power switch. 

“

Please wait.

” ap-

pears.

This message appears 
when you turn on the op-
eration switch.

Wait for the machine to get ready.

“

Please wait.

” ap-

pears.

This message appears 
when you change the ton-
er bottle.

Wait for the machine to get ready.