Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Server Setting Operations

Polycom, Inc. 

407

Click Save. 
The profiles appear in the calendared profiles list below.

 through 

 for each set of profiles to which you need to 

assign calendaring settings.

To use Polycom Conferencing for Outlook (PCO), a Polycom endpoint system 

must have a mailbox on the assigned Exchange server, and the Exchange 

server must authenticate the endpoint before it can access its mailbox.
To use the CMA system to automatically provision a Polycom endpoint 

system, the endpoint system must use the same credentials (username and 

password) to access both the Exchange server and the CMA system. Only then 

can the CMA system automatically provision a calendaring service-enabled 

endpoint system.

Go to Admin > Server Settings > Calendaring Management.

In the Manage Calendaring dialog box, click Mailbox.

In the Polycom Conferencing for Outlook page, enable Provision 

Mailbox and click OK. 
For Exchange credentials, each endpoint system will be provisioned with 

the same credentials it used to access the CMA system.
For its mailbox, each endpoint system will be provisioned with the 

mailbox configured for it in Active Directory. This mailbox must be 

pre-configured for the endpoint system on the Exchange server.

The CMA system supports the integration with Microsoft® Lync™ Server 

2010 or Microsoft® Office Communications Server 2007 by provisioning 

endpoints with the group and SIP settings they need. 
After you set up integration with Microsoft Lync Server or Office 

Communications Server, all endpoints receive directory information from one 

of those servers. You are no longer using the enterprise directory or the other 

directory functions in the CMA system.
This section describes  describes the tasks that enable provisioning endpoints 

for integration with Microsoft Lync Server or Office Communications Server.