Polycom Welding System 3725-77601-001H Manual Do Utilizador

Polycom CMA System Operations Guide 

408

Polycom, Inc.

You have set up the Microsoft Lync or Office Communications Server group 

that needs to be provisioned to endpoints in each automatic provisioning 

profile. This controls the directory that endpoints can see.

Go to Admin > Provisioning Profiles > Automatic Provisioning 

Profiles.

In the Automatic Provisioning Profiles page, select the profile of interest 

and click Edit.

In the Provisioning Fields dialog box, click Microsoft Lync Settings and 

enter a Group Name. 
The Group Name is the group set in the Microsoft Lync Server or Office 

Communication Server. 

Click OK.

By default, SIP is disabled in site provisioning. This procedure describes how 

to change existing site provisioning settings so that they provision integration 

with one of these unified communications servers.
To integrate with a Microsoft Lync or Office Communications Server, Polycom 

endpoints must have a user account on the Microsoft unified communications 

server infrastructure. To have the CMA system automatically provision a 

Polycom endpoint for this integration, the endpoint must use the same 

credentials (username and password) to access both the unified 

communications server and the CMA system. Only then can the CMA system 

automatically provision a calendaring service-enabled endpoint system.

You cannot provision integration with a Microsoft Lync or Office 
Communications Server via scheduled provisioning.

If the endpoint being provisioned is not capable of integration with a Microsoft 
Lync or Office Communications Server, the endpoint will ignore this settings.

The group setting here applies to both Microsoft Lync and Office 
Communication Server.