Polycom Welding System 3725-77601-001H Manual Do Utilizador

 

Remote Alert Setup Operations

Polycom, Inc. 

515

Click Update.

Monitored endpoints send events to the CMA system. The CMA system 

categorizes and reports endpoint alerts into three alert levels: Info, Minor, or 

Major. 
By default the Alert Severity Level is set to Info for all of the Endpoint Alert 

Types it reports. You have these options:
• You can leave all of the Alert Severity Levels set to Info and create a 

remote alert profile for each endpoint type being monitored that allows 

you to notify all users assigned that profile about all endpoint events 

applicable to that endpoint type.

• You can change some of the Alert Severity Levels to either Minor or 

Major and create multiple remote alert profiles that notify different users 

of endpoint events of different types and severity levels. 

Go to Admin > Alert Settings > Endpoint Alert Level Settings.

On the Endpoint Alert Level Settings page, change the Alert Severity 

Level for the different types of endpoint events as required.

Remote Control 
Battery Low

The battery in the endpoint’s remote needs to be 
replaced.

Credentials 
Required

The endpoint system requires that the user enter a valid 
username and password.

Credentials 
Failed

An attempt to log into the endpoint system failed.

HTTP Forbidden

The endpoint must be used in https: mode only.

Device Not 
Responding

The endpoint is not responding to the CMA system.

Heartbeat 
Timeout

The endpoint did not send a heartbeat to the CMA system 
within the required timeout period.

Gatekeeper 
Status Unknown

The CMA system gatekeeper cannot determine the 
connection status of the endpoint.

Gatekeeper 
Rejected

The CMA system gatekeeper rejected the endpoint’s 
attempt to register.

Gatekeeper 
Unregistered

The endpoint is not registered to the gatekeeper.