Polycom Welding System 3725-77601-001H Manual Do Utilizador

Polycom CMA System Operations Guide 

516

Polycom, Inc.

Click Update.

You can add a remote alert profile to identify which device alerts from which 

devices should be sent as part of a remote alert profile. Note that using a 

combination of setting alerts by device type and by specific types, provide 

additional granularity in managing device alerts.

Directory Status 
Unknown

The CMA system gatekeeper cannot determine the 
directory status of the endpoint.

Directory Not 
Registered

The endpoint is not registered to the directory service.

Presence Status 
Unknown

The CMA system gatekeeper cannot determine the 
presence status of the endpoint.

Presence 
Unregistered

The endpoint is not registered to the presence service.

User Assistance 
Request

The endpoint user sent a request for help.

Management 
URL Not Set

The CMA system is not one of the management URLs set 
on the endpoint, possibly because the management URL 
list is full.

Because endpoint systems do not have an interface to 
manually delete management URLs, if the management 
list is full you must disconnect the endpoint’s network 
cable for two minutes. This should clear up all the mgmt 
server URLs. 

Touch Control 
Disconnected

The Touch Control device that was connected to the listed 
HDX is no longer connected to the HDX.

Touch Control 
Software 
Incompatible with 
Endpoint

The software version of the Touch Control platform is not 
compatible with the Endpoint software version.

SIP URI Not 
Provisioned

A dynamically-managed endpoint at a site with SIP 
enabled does not have a SIP dial string reservation. The 
endpoint is provisioned without SIP enabled.

SIP Status 
Unknown

The SIP server cannot determine the status of the 
endpoint.

SIP Unregistered

The endpoint is not registered with the SIP server.