ONKYO TV Cables DV-SP506 Manual Do Utilizador

Video and audio are sent to the TV via the HDMI cable.

Video and audio are sent via the HDMI cables. You can 

enjoy better sound by using an AV receiver.

The connection method shown here can be used when 
the AV receiver’s HDMI input supports DSD and multi-
channel linear PCM over HDMI. If your AV receiver 
supports only CD and DVD-Video playback over HDMI, 
you’ll need to use “Connection method 2” on page 21 
of the DV-SP506 Instruction Manual. Refer to the 
Instruction Manual for more details.

By default, the HDMI Resolution is set to Auto so that video is automatically output at 
a resolution that suits the connected HDMI component. However, if there’s no picture, 
try pressing the [RESOLUTION] button on the DV-SP506 or its remote controller.

The HDMI resolution can also be set by using the onscreen setup menus, which can be 
displayed by pressing the [SETUP] button. See pages 46 and 50 of the DV-SP506 
Instruction Manual for details.

• Easily connect video, audio, and control signals with just one HDMI cable.

• Enjoy high-definition video (1080p/1080i/720p).

• Output 480i/576i video as it is for processing by an AV receiver or TV with advanced scaling built in.

• Enjoy 5.1-channel Dolby Digital and DTS digital surround sound, and multichannel linear PCM 

(DVD-Audio) and DSD (SACD).

• Use RIHD (Remote Interactive over HDMI).

Video
Audio

TV

When the DV-SP506 is outputting a signal from its 
HDMI OUT, the DV-SP506’s HDMI indicator lights 
up. If the indicator does not light up, the HDMI con-
nections are not correct, or a connected HDMI com-
ponent is not turned on. The HDMI indicator flashes 
while the DV-SP506 verifies a connected HDMI 
component.

RETURN

SETUP

TOP MENU

MENU

CU

RSOR

PU

SH TO ENTE

R

HDMI indicator

Speakers

AV receiver

TV

Video
Audio

Video
Audio

DV-SP506_Setup_U8.fm Page 1 Friday, September 5, 2008 3:19 PM