Oceanic ATOM 2.0 Manual Do Utilizador

If voltage of the ATOM decreases to the Warning level

(2.75 volts), the Battery icon will appear on Surface display

screens (fig. 3a) as an indication that the Battery should be

changed prior to commencing a series of dives.

If the ATOM's voltage decreases to the Alarm level (2.50

volts), the Battery icon will flash and the message CHNG >

BATT will scroll at the top of the display (Fig. 4). Operation

will automatically revert to Main Time Mode. The ATOM

would then only operate in Watch modes until the Battery

becomes completely depleted.

Low Battery Warning/Alarm conditions are not displayed

during Dive Modes.

If a Low Battery Condition was not displayed prior to

starting a Dive, and a Low Battery Condition occurs during

the dive, there will be sufficient Battery power remaining to

maintain operation for the remainder of that dive.

Transmitters use one 3 volt, CR2 Lithium Battery. A Transmitter's

battery should provide normal operation for 1 year or 300 dive

hours. Transmitters check battery voltage when they are pressur-

ized and will send a Low Battery signal to the Receiver in the

ATOM when the voltage drops below the Warning level.

Transmitter Low Battery Warning/Alarm conditions are only

displayed on Status screens that can be accessed while

viewing the NORM Surface Display.

Fig. 4 - LOW BATTERY

ALARM

Fig. 3 - LOW BATTERY

WARNING