Nlynx ETU400 Manual Do Utilizador

ETU400 User Guide 011603

 

The parameters used with PCFROMPC multiple-device transfer are described

below:

Qualified file name 

The name of the file to be transferred. If you
are transferring a file from multiple micros, the

file name, including the path name, must be

identical on each micro.

MICLST1 

The device name of the source micro(s). To
transfer a file from more than one micro, enter

the device name of each. (You must be authorized

to use each device you specify in the MICLIST1

parameter. If you can sign on to the device, then

you are authorized to use it.)

Enter a plus sign ( ) here and press ENTER to

display multiple MICLST1 prompts in which to

enter the device names.

Each device you transfer from must be powered on,

have emulation loaded, and have the AS/400 sign-

on screen displayed.

MICLST2 

The device name of the target micro. The default,
*REQUESTER, transfers multiple files to the micro

from which you initiate the command. (You must be

authorized to any device you specify in this

parameter or the transfer will fail.)

Files transferred to the target micro have the

same names as the devices from which they came.

Device names can be up to ten characters long. If

the device name of the source micro is longer

than eight positions, the file name on the target

micro will be in the format:  XXXXXXXX.XX.

For example, a file transferred from a micro with

device name Port5 Addr3 to another micro is

called PORT5ADD.R3.

NOTE: MICLST2 must be changed from *REQUESTER to
the target micro name when you run this command
in batch mode.