Nlynx ETU400 Manual Do Utilizador

ETU400 User Guide 011603

 

To transfer a single file from one micro to multiple micros, specify the

name of the file, the device name of the micro from which the file is

being transferred, and the name of the device or devices to which the

file is being transferred.

The name of the micro file to be transferred. If
you are transferring a file to multiple micros,

the file name, including the path name, must be

identical on each micro.  For additional

information, see About Microcomputer Files in

Chapter 3.

The device name of the source micro. The default,
*REQUESTER, transfers the file from the micro on

which the PCTOPC command is currently being run.

(To transfer a file from a different micro, enter

the device name of the micro. You must be

authorized to use the device you specify in this

parameter, or the transfer will fail.)

NOTE: This parameter must be changed from
*REQUESTER to the name of the source micro when
you run this command in batch mode. 

MICLST2 

The device name of the micro to which the file is
being transferred. You can transfer the file to

up to ten micros. (To transfer the file to more

than one micro, enter the device name of each

micro. You must be authorized to use each device

you specify in this parameter, or the transfer

will fail.)

Enter a plus sign ( ) here and press ENTER to

display multiple MICLST2 prompts.

Each device you transfer to must be powered on,

have emulation loaded, and have the AS/400 sign-

on screen displayed.