Microboards Technology GX Auto Printer Manual Do Utilizador

 

 

The GX Auto Printer system has been aligned at the factory. The factory alignment values are on a 
label on the back of the GX Auto Printer.  Follow these steps to enter the factory values: 

•  Click on the Start Button on your 

Windows computer. 

• Select 

Settings and then Printers. 

•  Right click the Microboards GX Series 

icon. 

• Select 

Printing Preferences. 

• Select 

the 

Alignment Tab. 

•  Click on the 

 selection in the 

Resolution box.  

•  Enter the values listed with the GX 

Auto Printer into the Top and Left Side 
boxes. 

• Click 

the 

Apply button. 

• Click 

the 

OK button. 

•  Verify the alignment by printing full 

coverage image created in SureThing.  
The image should print centered on the 
disc.  If not, adjust the Top and Left Side alignment values according to the graphic on the 
Alignment tab and repeat. 

 

A shortcut to the GX Toolbox was added to your desktop during the printer installation.  
Double-click the icon to open the toolbox.  For each of the functions, a blank disc will need 
to be loaded. 

To confirm the computer is communicating with the GX 
Auto Printer, print a Test Disc.  This can be done with one 
of the inkjet printable CD’s included with your GX Auto 
Printer, or an inkjet compatible disc you may already have. 
To print the Test Disc: 

•  Place the inkjet printable media into the input 

hopper. 

• Click 

Print Test Disc. 

•  Once printing is complete, the disc will be ejected 

into the output hopper. 

Load a blank disc and click the Clean button to print a design intended to clean the print nozzles of 
the ink cartridge.  This should be done if you notice a drop in print quality.