Microboards Technology GX Auto Printer Manual Do Utilizador

• Using the GX Auto Printer 

 

The next step is to load your GX Auto Printer with output discs.  The system 
will accept CD or DVD 120 mm (12 cm) inkjet printable discs.  If the disc does 
not have an inkjet printable surface, the ink will not adhere to the surface of the 
disc.  The GX Auto Printer will only accept 12 cm discs.  Business card or 8 cm 
discs are not supported by this system.    

 

Load the first 5 or 6 discs flat, as seen in the top image to the right. 

Load the rest of the discs at an angle, against the wide input rod, as seen in 
the bottom image to the right. 

The GX Auto Printer will hold a maximum of 50 discs.  DO NOT load more than 
50 discs in the system, as this may cause the discs to feed incorrectly. 

SureThing Disc Labeler is included with the GX Auto Printer and will be installed during the GX 
Installation.  For more information on using SureThing, please refer to the SureThing Help menu. 

Any label you create in SureThing must use the Microboards template to print correctly.   

1.  To create a new label, either click New Project in the Action window on the left, or select New 

from the File menu. 

2. Click the Select Label button on the lower left corner of the dialog that opens to view the 

available label templates if the dialog that opens does not appear as shown below.   

3. Highlight CD/DVD Printers in 

the Media Type column. 

4. Highlight Microboards in the 

Manufacturer column. 

5.  Select from the options listed 

in the Label Type column. 

6. Click 

OK to begin designing the label. 

Select Print from the File menu while the label you want to print is open.  Be sure that 
you have selected the Microboards GX Series and that CD/DVD Printer is selected in 
the Print Using field before clicking the Print button.   

If you are printing more than one copy of a label, enter in the number you wish to print before clicking 
the Print button.