Microboards Technology PF-Pro Disc Printer Manual Do Utilizador

• Setting Printer Alignment 

 

The PF-Pro Disc Printer system has been aligned at the factory, but may need to be adjusted 
depending on the type of media and media print surface on which you are printing.  Follow these 
steps to adjust the alignment: 

• Click 

System Preferences in the Dock. 

• Select 

Print & Fax. 

• Click the Set Up Printers… 

button. 

•  Highlight the Microboards PF-Pro 

icon. 

• Click 

the 

Utility button to open the 

Microboards Printer Utility. 

• Select 

Disc Printing from the list. 

•  Enter the values listed with the PF-

Pro Disc Printer into the Top Side  
and Left Side boxes. 

• Click 

the 

Apply Now button. 

•  Test the alignment by printing a full-coverage image (120 mm by 120 mm) onto an unprinted 

disc.  The image should print centered on the disc.  If not, adjust the Top Side and Left Side 
as necessary, verifying the alignment by printing the same image. 

Access the Microboards Printer Utility by selecting the System Preferences from the 
Dock.  Select Print & Fax.  Highlight the Microboards PF-Pro icon and click the 
Utility icon.  The Microboards Printer Utility pages will appear in the following order. 

The  Supplies Status show how much 
remains of all 4 colors, Cyan, Magenta, 
Yellow, and Black.  The values shown will 
be refreshed when you go to another 
setting page and then back to the 
Supplies Status page. 

In addition to the displayed levels in the 
Printer Utility, an LED indicator on the front 
of the PF-Pro above each cartridge will 
light when the ink level is at 25% in that 
cartridge.  The LED will blink when the ink 
level is at 0%.