LOEWE Individual Sound Projector Manual Do Utilizador

 - 14

Using the microphone supplied, the Sound Projector evaluates the test signals it 
generates and can thus adjust the sound output to your actual room.

➠

 Protect the microphone from heat and from direct sunlight.

➠

 Do not use an extension lead for the microphone.

➠

  Position  the  microphone  where  you  are  planning  to  have  your  listening 

position (ear height).

➠ 

Avoid obstacles between the microphone and the walls.

➠

 With a subwoofer connected where required, set the volume to medium and 

set the transmission/high-pass frequency to maximum.

Press the on/off button on the unit or

the on/off button on the remote control to switch the unit off.
Connect the microphone supplied to the socket MIC-IN on the 
underside of this unit.

Assemble the stand supplied:
1. Separate the individual parts from each other (1).
. Push the two long parts together (2).
3. Put the round part on top (3).
4. Place the microphone on the round part (4).

Position the microphone at least 1.8 m away from the Sound 
Projector centred on it on a level surface. Use the stand supplied 
to set up the microphone at the height of your required listening 
position, pointing upwards.

Microphone in listening position

Distance microphone 

- Sound Projector 

> 1.8 m

Centre line