LOEWE Individual Sound Projector Manual Do Utilizador

15 - 

➠ 

Ensure that the devices are set up correctly (page 8/9),  

all cables are connected properly (page 10,13) and that the 
microphone is connected and positioned correctly (page 14).

Set the remote control up for TV operation.

Press the on/off button on the remote control to switch on the 
Loewe TV set and the Sound Projector.

Call up the TV menu.

34

 Select Connections.

6

 Change to the menu line below.

34

 Select Sound components.

OK Select Sound components wizard. 

The selection Sound playback via ... appears.

END

OK

OK

TV speakers

Speaker system                              

HiFi/AV amplifier

Sound projector                                   

HiFi/AV amplifier or TV speaker (switchable)

Sound projector or TV speakers (switchable)

Sound components
Sound playback via ...

Sound components wizard

When using a Sound projector please connect the TV socket AUDIO DIGITAL 

OUT to the Sound projector input TV COAXIAL. For controlling the Sound 

projector via the TV set please connect the RS232C(TV) socket to the 

RS232C(Sound projector) socket additionally.

If you have a TV set without built-in speakers, you have to select "Sound 

projector" only.

Proceed

56

 Select Sound Projector or Sound Projector or TV 

speakers (switchable) (page 4).

Confirm OK.

END

OK

OK

Proceed

Set/change listening position

Configuration/modification of Sound projector

Sound projector

Sound components wizard

The wizard supports to optimise the Sound projector settings for your 

listening positions. Up to 3 positions can be stored. You will be prompted

to turn the TV set to the desired position and after that to start the Auto 

setup of the Sound projector.

Activate listening position

OK Call up menu Set/change listening position.

END

OK

OK

Proceed

Position 1 (MEM1)

Select memory position

Sound projector

Sound components wizard

Select one of the three memory positions for the new sound adjustment which 

will be set subsequently.

Position 2 (MEM2)

Position 3 (MEM3)

34

 Select one of the memory positions Position 1-3 

(MEM1-3) .

Confirm OK.

Sound components wizard

Turn your TV set by using the cursor keys left/right to the desired 

listening which is optimal for your listening position and confirm with the 

      key.

END

OK

-30

Rotate TV

Sound projector

Proceed

OK

If the Loewe TV set is equipped with swivel caster control, now 
use 34 to turn the TV to the required listening position.

END

OK

OK

Sound components wizard

Start the acoustic auto setup for the Sound projector now (please also read 

the manual for this). Place the microphone to the desired position. Please 

leave the room after pressing the       key to avoid any disturbances. The 

auto setup will start after 10 seconds automatically. About 3 minutes later 

a final chime is played. After this follow the instructions of the wizard.

Start auto setup

Sound projector

Proceed

OK

OK Start auto setup.