Logic 3 V5.00 Manual Do Utilizador

This is the resolution of the image that will be displayed on the Live Viewer.  If you are 

connecting to a 3MP IP camera, the resolution  is  much  higher  than  your  monitor  is 
capable of displaying, so it makes sense to reduce the resolution to minimize CPU 

usage. 

The user name and password to connect to the camera.  The default values are 
automatically entered. 

This will recompress the image using our AZTECH codec and resize the image to 

352x240 before saving.  This is an extremely CPU intensive setting.  The change of 
resolution may impact the detail of the original picture. 

If the JPG image provided by the HTTP camera supports fast decompression, select this 

option to significantly reduce the number of CPU cycles needed for rendering the 
network camera feed. 

 

 

 Not all network cameras support fast decompression. Disable 

“Fast Decompression” if the image does not display or appears distorted when this 
feature is enabled. 

You can connect to another DVR in the same way you would connect to an IP camera and display any camera 

that it currently receives.  This allows you to relay analog video from one recording DVR to a second 
recording DVR. 

 

 

To set up this configuration, select the Network Camera Type Vigil DVR. The recommended settings for this 

setup are: 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

59