Logic 3 V5.00 Manual Do Utilizador

Address:  IP Address of the Vigil Server DVR 

Port:  Live Video Port, default 22802 
Camera Number:  The camera input number on the remote DVR to be used 

Timeout:  Number in seconds before connection time 
Decoding FPS:  The Decoding FPS should be set to a value equal to or greater than the recording key-frame 

rate on the remote DVR camera input. Use the All Frame setting for camera inputs with low key-frame 
recording (i.e. AZTech) 

Live Resolution: Select desired resolution 
User and Password:  The username and password used to log into the remote DVR 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

60 

 

Now that the cameras have been configured, we move on to the advanced recording options.  The first of 

these is the recording mode. 
 

 

 

There are four modes encompassing a full range recording possibilities.  These modes are accessible by 
selecting the appropriate option from the “Recording Mode” drop-down. 

 

Always recording, 24 hours 7 days a week. 

Records only when motion is detected.  Full configuration over motion area, amount of 
motion, size of motion, and post motion recording time makes this a very customizable 

recording mode. 

Records based on a schedule.  The easy to use graphical interface provides a full 
overview  of  an  entire  week’s  schedule  in  15-minute  intervals.    This  mode  offers  full 

control over recording times and any combination of constant or motion controlled 
recording types. 

Records only when a motion alarm is detected.  Motion alarms use a much more 

sophisticated control algorithm for detecting motion.  It also has its very own scheduling 
feature.  If this mode is not selected, then “Motion Alarm” is available in conjunction with 

the other modes. 

When recording in Motion mode, click the “Motion Settings…” button to access the “Motion Settings” window.