Lenmar Enterprises OmniSource Digital Camera Batteries Folheto

Página de 2
Note: It is normal for the charger or the battery to become warm 
during recharging. 
Note: Batteries will self discharge when not in use whether they are 
installed in a camcorder, digital camera or not.  Batteries can be kept 
fresh if you recharge them every 2-3 months, when not being used 
regularly.  
 
Trouble Shooting Tips:  
• 
The right hand Power Indicator LED will glow red as long as 
power is connected. If not, the unit is not receiving power. Re-
check the power connections to the charger (when using the car 
adapter, be aware that some cars turn off power to the cigarette 
lighter when the key is off).  
• 
If the green charge  indicator LED turns on immediately when 
the battery is attached, the battery may nearly charged already. 
Leave the battery on the unit for 1-2 hours to be sure the 
battery has been fully charged. 
• 
If, after you have attached the battery to be charged, neither the 
red or green Charge Indicator LED’s turn on, the battery or 
adapter plate may not be properly of fully connected. Unplug 
the unit and check all connections of the battery to the adapter 
plate and the adapter plate to the charger base. Also, ,make sure 
the adapter plate is the proper one for your battery.  
• 
Use a clean dry cloth when necessary to keep the metal 
contacts of both charger and battery clean. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Cautions: 
• 
For use with Lithium-Ion batteries ONLY! Use with other type 
batteries voids warranty, may cause damage to the charger / 
battery and possibly cause injury to the user. 
• 
Recharge Li-Ion batteries after use and before being put away. 
• 
Do not leave the battery connected to camcorder or camera 
when not to being used. 
• 
Do not leave the battery connected to the charger for prolonged 
periods. 
Remove the battery after charge is complete.  
• 
Unplug the charger when not in use. 
• 
Do not use, place or store the charger where it may come into 
contact with water or moisture. 
• 
Always replace frayed or damaged wire and broken plugs 
immediately. 
• 
Use this charger with the power adapters included in the 
package only. 
• 
It is not necessary or recommended to discharged a Li-Ion prior 
to charge. 
 
Note: Batteries will self discharge when not in use whether they are 
installed in a camcorder, digital camera or not. Batteries can be kept 
fresh if you recharge them every 2-3 months.  NiCD batteries should 
be stored uncharged. 
 
Specifications:  
 
 
• 
Power Input:  
 
12-18 VDC @ 500mA 
• 
Charge Method:  
Constant Voltage 
 
 
                  Rapid Charge, Switching to   
                   
                   “Trickle Charge” when full. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Limited 1 Year Warranty 
This limited warranty starts from the date of original purchase and 
expires 1 year thereafter. If, during this period, any part, because of 
manufacturing defects or workmanship fails to function properly 
under normal use will be repaired at no charge for parts and labor or, 
at our option, the product will be replaced.  The following is 
excluded: damages from delay or loss of use of equipment, or 
damaged batteries, malfunctions resulting from misuse, tampering, 
unauthorized repairs, modifications, or accident. 
Package the unit and its accessories carefully using ample padding 
material to prevent damage in transit and ship it prepaid and insured 
to: 
Lenmar Enterprises, Inc.  
4035 Via Pescador 
Camarillo, CA  93012 
When sending in product for service, your package should include 
evidence of date and place of purchase.  Enclose $10.00 for shipping 
and handling for addresses in the U.S. For outside the U.S. and 
Canada, freight will vary depending upon ship to address. 
 
For additional questions, comments or to explore other Lenmar 
battery solutions, visit our web site at: 
 
 
 
 
202-164