Lanier 2001 Manual Do Utilizador
Dial Registration
4 - 16
Facsimile Programming
Dial Registration
This section gives instructions on how to program the number to be stored in the One-
Touch, Speed Dial and Group Dial Keys. In addition, it shows you how to set up special
parameters for each One-Touch Key, including batch Time and Relay Broadcast.
Touch, Speed Dial and Group Dial Keys. In addition, it shows you how to set up special
parameters for each One-Touch Key, including batch Time and Relay Broadcast.
One-Touch Keys
You can program the most frequently dialed fax numbers into One-Touch Keys. This
allows you to transmit documents simply by pressing a One-Touch Key and the START
Key. You can program any of the One-Touch Keys as Group Dial Keys with up to 50
locations in each.
allows you to transmit documents simply by pressing a One-Touch Key and the START
Key. You can program any of the One-Touch Keys as Group Dial Keys with up to 50
locations in each.
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press YES since this is the first menu to appear and
press YES to enter the One-Touch Program.
press YES to enter the One-Touch Program.
3
Press the One-Touch Key you wish to program.
4
Press YES to accept your selection.
5
Enter the Telephone number you wish to transmit
to and press YES.
to and press YES.
6
Enter the Name you wish associated with this
number and press YES after checking to see it OK.
number and press YES after checking to see it OK.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
either EDIT or DELETE and then proceed with the
needed changes.
DIAL REGISTRATION?
YES / or 1-5
1 ONE-TOUCH DIAL?
OK=YES
-SELECT REGIST. KEY-
ONE-TOUCH 01
or PRESS “YES”
OK=YES
NAME=_
OK=YES
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-